Computer modeling of the infusion process in the manufacture of composite arched element

Goncharov V.A., Raskutin A.E.
UDC
678.84
DOI
10.18577/2307-6046-2015-0-7-11-11
Article PDF (Russian) (569.91 KB)
How to cite
Goncharov V.A., Raskutin A.E. Computer modeling of the infusion process in the manufacture of composite arched element // Proceedings of VIAM. 2015. No. 7. DOI: 10.18577/2307-6046-2015-0-7-11-11. URL: https://test.viam.ru/en/journal/2015/7/11
Abstract

The article contains the sequence of operations for modeling of manufacturing by infusion composite arched element. Described are phenomenological processes arising from the formation and critical characteristics that must be taken into account in the simulation.

Reference list
  1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitija materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative development of VIAM Federal State Unitary Enterprise of GNTs Russian Federation on implementation «The strategic directions of development of materials and technologies of their processing for the period till 2030»] //Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33.
  2. Kablov E.N. Materialy i himicheskie tehnologii dlja aviacionnoj tehniki [Materials and chemical technologies for aviation engineering] //Vestnik Rossijskoj akademii nauk. 2012. T. 82. №6. S. 520–530.
  3. Kablov E.N., Karimova S.A., Semenova L.V. Korrozionnaja aktivnost' ugleplastikov i zashhita metallicheskih silovyh konstrukcij v kontakte s ugleplastikom [Corrosion activity ugleplastikov and protection of metal load bearing structures in contact with the ugleplastiky] //Korrozija: materialy, zashhita. 2011. №12. S. 1–7.
  4. Kablov E.N., Sivakov D.V., Guljaev I.N., Sorokin K.V., Fedotov M.Ju., Goncharov V.A. Metody issledovanija konstrukcionnyh kompozicionnyh materialov s integrirovannoj jelektromehanicheskoj sistemoj [Methods of research of constructional composite materials with the integrated electromechanical system] //Aviacionnye materialy i tehnologii. 2010. №4. S. 17–20.
  5. Raskutin A.E., Goncharov V.A. Komp'juternoe modelirovanie tehnologicheskogo processa izgotovlenija PKM metodom vakuumnoj infuzii [Computer modeling of technological process of manufacturing of PKM by method of vacuum infusion] //Aviacionnye materialy i tehnologii. 2012. №S. S. 286–291.
  6. Dushin M.I., Muhametov R.R., Platonov A.A., Merkulova Ju.I. Issledovanie fil'tracionnyh harakteristik armirujushhih napolnitelej i svjazujushhih pri razrabotke tehnologii bezavtoklavnogo formovanija polimernyh kompozicionnyh materialov [Research of filtrational characteristics of reinforcing fillers and binding when developing technology of bezavtoklavny formation of polymeric composite materials] //Aviacionnye materialy i tehnologii. 2013. №2. S. 22–25.
  7. Grigor'ev M.M., Kogan D.I., Tverdaja O.N., Panina N.N. Osobennosti izgotovlenija PKM metodom RFI [Features of manufacturing of PKM RFI method] //Trudy VIAM. 2013. №4. St. 03 (viam-works.ru).
  8. Sokolov I.I., Raskutin A.E. Ugleplastiki i stekloplastiki novogo pokolenija [Ugleplastiki and fibreglasses of new generation] //Trudy VIAM. 2013. №4 (viam-works.ru).
  9. Dushin M.I., Hrul'kov A.V., Muhametov R.R., Chursova L.V. Osobennosti izgotovlenija izdelij iz PKM metodom propitki pod davleniem [Features of manufacturing of products from PKM impregnation method under pressure] //Aviacionnye materialy i tehnologii. 2012. №1. S. 18–26.
  10. Mihajlin Ju.A. Konstrukcionnye polimernye kompozicionnye materialy [Constructional polymeric composite materials]. SPb.: Nauchnye osnovy i tehnologii. 2008. 822 s.
  11. Chursova L.V., Dushin M.I., Kogan D.I., Panina N.N., Kim M.A., Gurevich Ja.M., Platonov A.A. Plenochnye svjazujushhie dlja RFI-tehnologii [Film binding for RFI technology] //Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 63–66.
  12. Goncharov V.A., Shienok A.M., Sorokin K.V., Fedotov M.Ju., Zelenskij P.V. Modelirovanie infuzionnyh tehnologij izgotovlenija sloistyh polimernyh kompozicionnyh materialov [Modeling of infusional manufacturing techniques of layered polymeric composite materials] //Vse materialy. Jenciklopedicheskij spravochnik. 2013. №1. S. 43–49.
  13. Hrul'kov A.V., Dushin M.I., Popov Ju.O., Kogan D.I. Issledovanija i razrabotka avtoklavnyh i bezavtoklavnyh tehnologij formovanija PKM [Researches and development of avtoklavny and bezavtoklavny technologies of formation of PKM] //Aviacionnye materialy i tehnologii. 2012. №S. S. 292–301.
  14. Goncharov V.A. Modelirovanie infuzionnyh tehnologij izgotovlenija PKM na osnove jepoksidnyh svjazujushhih i uglerodnyh tkanej Porcher [Modeling of infusional manufacturing techniques of PKM on the basis of epoxy binding and carbon fabrics of Porcher] //Novosti materialovedenija. Nauka i tehnika. 2013. №5. St. 08 (materialsnews.ru).
  15. Bunakov V.A., Golovkina G.S. Armirovannye plastiki [The reinforced plastics]. M.: MAI. 1997. 404 s.
  16. Antonucci V., Esposito M., Ricciardi M.R., Raffone M., Zarrelli M., Giordano M. Permeability characterization of stitched carbon fiber preforms by fiber optic sensors //Express Polymer Letters. 2011. V. 5. P. 1075–1084.
  17. Porto J., Letzow M., Dos Santos E., Amico S., Souza J., Isoldi L. Computational modeling of RTM and LRTM processes applied to complex geometries //EngenhariaTérmica (Thermal Engineering). 2012. V. 11. P. 93–99.
  18. Kotov V.V. Modelirovanie proizvodstva kompozicionnyh materialov – vyzov vremeni [Modeling of production of composite materials – time call] //Perspektivnye materialy dlja aviakosmicheskoj promyshlennosti. 2011. №1. S. 21–23.
  19. Li J., Zhang C., Liang R., Wang B., Walsh S. Modeling and analysis of thickness gradient and variations in vacuum-assisted resin transfer molding process //Polymer Composites. 2008. V. 29. P. 473–482.
  20. Goncharov V.A., Fedotov M.Ju., Sorokin K.V., Raskutin A.E. Modelirovanie stadii propitki poluchenija ugleplastikov na osnove jepoksidnyh svjazujushhih dlja RTM i VARTM tehnologij [Modeling of stage of impregnation of receiving ugleplastikov on the basis of epoxy binding for RTM and VARTM of technologies] //Spravochnik. Inzhenernyj zhurnal. 2013. №12. S. 24–28.
  21. Goncharov V.A., Fedotov M.Ju., Shienok A.M. Modelirovanie polimernyh kompozicionnyh materialov [Modeling of polymeric composite materials] /V sb. trudov konf. «Novye materialy i tehnologii glubokoj pererabotki syr'ja – osnova innovacionnogo razvitija jekonomiki Rossii». M.: VIAM. 2010. S. 8.
  22. Goncharov V.A., Fedotov M.Ju. Modelirovanie fiziko-mehanicheskih svojstv intellektu-al'nogo ugleplastika s optovolokonnymi sensorami [Modeling of physicomechanical properties intellectual ugleplastika with fiber optic sensors] /V sb. materialov. V Mezhdunarodnoj konf. «Deformacija i razrushenie materialov i nanomaterialov» DFMN 2013. M. 2013. S. 822–823.
  23. Goncharov V.A., Sorokin K.V., Fedotov M.Ju., Raskutin A.E. Modelirovanie tehnologicheskogo processa izgotovlenija metodom infuzii PKM na osnove svjazujushhego VSJe-21 i tkani Tenax-e Style 450 [Modeling of technological process of manufacturing by method of infusion of PKM on the basis of binding VSE-21 and Tenax-e Style 450 fabrics] //Trudy VIAM. 2014. №10. St. 04 (viam-works.ru).