Application of the confocal laser imaging microscopy method for corrosive damages study

Iskhodzhanova I.V., Orlov M.R., Grigorenko V.B., Lapteva M.A.
UDC
537.533.3
DOI
10.18577/2307-6046-2015-0-4-11-11
Article PDF (Russian) (2.47 MB)
How to cite
Iskhodzhanova I.V., Orlov M.R., Grigorenko V.B., Lapteva M.A. Application of the confocal laser imaging microscopy method for corrosive damages study // Proceedings of VIAM. 2015. No. 4. DOI: 10.18577/2307-6046-2015-0-4-11-11. URL: https://test.viam.ru/en/journal/2015/4/11
Abstract

On the investigations examples of aircraft gas turbine engines corrosive damages after 5 years exposure on the open experimental ground of the FSUE «VIAM» G.V. Akimov Gelendzhik climatic test center (VIAM GCTC) the possibilities of confocal laser imaging microscopy are represented. The 3D-models were built and quantitative assessment of surface topography by statistical data processing of the roughness using standard software was undertaken.

Reference list
  1. Kablov E.N. Aviakosmicheskoe materialovedenie [Aerospace materials science] //Vse materialy. Jenciklopedicheskij spravochnik. 2008. №3. S. 2–14.
  2. Kablov E.N. Strategicheskie napravlenija razvitija materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their processing for the period till 2030] //Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
  3. Kablov E.N. Korrozija ili zhizn' [Corrosion or life] //Nauka i zhizn'. 2012. №11. S. 16–21.
  4. Orlov M.R. Strategicheskie napravlenija razvitija Ispytatel'nogo centra FGUP «VIAM» [Strategic directions of development of the Test center VIAM Federal State Unitary Enterprise] //Aviacionnye materialy i tehnologii. 2012. №S. S. 387–393.
  5. Morozova L.V., Ishodzhanova I.V. Issledovanie zakonomernostej izmenenija rel'efa pover-hnosti obrazcov iz aljuminijlitievyh splavov metodom lazernoj mikroskopii [Research of patterns of change of relief of surface of samples from alyuminiylitiyevy alloys method of laser microscopy] //Trudy VIAM. 2014. №10. St. 08 (viam-works.ru).
  6. Fridljander I.N., Chuistov K.V., Berezina A.L., Kolobnev N.I., Koval' Ju.N. Aljuminij-litievye splavy. Struktura i svojstva [Aluminum - lithium alloys. Structure and properties]. K.: Naukova dumka. 1992.
  7. Antipov V.V., Kolobnev N.I., Hohlatova L.B. Razvitie aljuminijlitievyh splavov i mnogostupenchatyh rezhimov termicheskoj obrabotki [Development of alyuminiylitiyevy alloys and multistage modes of thermal processing] //Aviacionnye materialy i tehnologii. 2012. №S. S. 183–195.
  8. Orlov M.R. High-Temperature Corrosive Damage to Superalloys during Operation of Blades of Gas-Turbines and Power Plans //Polymer science. D. 2013. V. 6. №3. P. 250–255.
  9. Abraimov N.V., Orlov M.R., Shkretov Ju.P. Nekotorye aspekty vysokotemperaturnogo okis-lenija splava na osnove γʹ-Ni3Al [Some aspects of high-temperature oxidation of alloy on basis γʹ-Ni3Al] //Korrozija: materialy, zashhita. 2010. №8. S. 1–11.
  10. Orlov M.R., Ospennikova O.G., Gromov V.I. Zamedlennoe razrushenie stali 38HN3MA v processe dlitel'noj jekspluatacii [Steel 38ХН3МА delayed fracture in the course of long operation] //Vestnik MGTU im. N.Je. Baumana. Ser. «Mashinostroenie». 2011. №SP2. S. 5–12.
  11. Orlov M.R., Jakimova M.S. Zamedlennoe razrushenie monokristallicheskih lopatok iz zharo-prochnogo splava ZhS26-VI v processe jekspluatacii GTU [Delayed fracture of single-crystal blades from ZhS26-VI hot strength alloy in use GTU] //Gazoturbinnye tehnologii. 2011. №8. S. 10–15.
  12. Ishodzhanova I.V. Primenenie konfokal'noj lazernoj skanirujushhej mikroskopii dlja reshenija materialovedcheskih zadach [Application of konfokalny laser scanning microscopy for the solution of materialovedchesky tasks] /V sb. materialov VII Evrazijskoj nauch.-praktich. konf. «Prochnost' neodnorodnyh struktur». M.: MISiS. 2014. S. 138.
  13. Chabina E.B., Alekseev A.A., Filonova E.V., Lukina E.A. Primenenie metodov analiticheskoj mikroskopii i rentgenostrukturnogo analiza dlja issledovanija strukturno-fazovogo sostojanija materialov [Application of methods of analytical microscopy and the rentgenostrukturny analysis for research of structural and phase condition of materials] //Trudy VIAM. 2013. №5. St. 06 (viam-works.ru).
  14. Klevcov G.V., Merson E.D. O vozmozhnosti ispol'zovanija konfokal'nogo lazernogo skanirujushhego mikroskopa dlja issledovanija mikrorel'efa poverhnosti razrushenija metallicheskih materialov [About possibility of use of konfokalny laser scanning microscope for research of microrelief of surface of destruction of metal materials] //Fundamental'nye issledovanija. 2012. №11. S. 1185–1189.
  15. Hovis D.B., Heuer A.H. The use of laser scanning confocal microscopy (LSCM) in materials science //Journal of Microscopy. 2010. V. 240. №3. P. 173–180.
  16. Klark Je.R., Jeberhardt K.N. Mikroskopicheskie metody issledovanija materialov [Microscopic methods of research of materials]. M.: Tehnosfera. 2007. 376 s.
  17. Orlov M.R., Ospennikova O.G., Naprienko S.A., Morozova L.V. Issledovanie ustalostnogo razrushenija konicheskih shesteren reduktora central'nogo privoda gazoturbinnogo dvigatelja, izgotovlennyh iz stali 20H3MVF [Research of fatigue failure of conic gear wheels of reducer of the central drive of the gas turbine engine, made of steel 20Х3МВФ] //Deformacija i razrushenie materialov. 2014. №7. S. 18–26.
  18. Jevans Ju.R. Korrozija, passivnost' i zashhita metallov [Corrosion, passivity and protection of metals]. M.: Gosudarstvennoe nauch.-tehnich. izd-vo lit. po chernoj i cvetnoj metallurgii. 1941. 886 s.
  19. Orlov M.R., Ospennikova O.G., Karachevcev F.N. Obespechenie kachestva poverhnosti rabochih lopatok turbiny pri nanesenii zashhitnyh diffuzionnyh pokrytij [Providing surface quality of working turbine blades when drawing protective diffusion coatings] //Metallurg. 2013. №2. S. 77–84.
  20. Orlov M.R., Ospennikova O.G., Rassohina L.I. Podgotovka poverhnosti lopatok turbiny dlja nerazrushajushhego kontrolja metodom kapilljarnoj defektoskopii [Surface preparation of turbine blades for non-destructive testing by method of capillary defektoskopiya] //Zavodskaja laboratorija. Diagnostika materialov. 2013. №8. S. 52–60.
  21. Zhuk N.P. Kurs teorii korrozii i zashhity metallov [Course of the theory of corrosion and protection of metals]. M.: Metallurgija. 1976. 472 s.
  22. Shluger M.A., Azhogin F.F., Efimov E.A. Korrozija i zashhita metallov [Corrosion and protection of metals]. M.: Metallurgija. 1981. 216 s.
  23. Sokol I.Ja., Ul'janin E.A., Fel'dgandler Je.G. i dr. Struktura i korrozija metallov i splavov. Atlas [Structure and corrosion of metals and alloys. Atlas]: Sprav. izd. M.: Metallurgija. 1989. 400 s.
  24. Semenova I.V., Florianovich G.M., Horoshilov A.V. Korrozija i zashhita ot korrozii [Corrosion and corrosion protection]. M.: Fizmatlit. 2002. 336 s.
  25. Environmental and Industrial Corrosion – Practical and Theoretical Aspects /Ed. B.V. Salas, M. Schorr. In Tech. 2012. 168 p.
  26. Reformatskaja I.I., Rodionova I.G., Bejlin Ju.A. i dr. Rol' nemetallicheskih vkljuchenij i mikrostruktury v processe lokal'noj korrozii uglerodistyh i nizkolegirovannyh stalej [Role of non-metallic inclusions and microstructure in the course of local corrosion carbonaceous and low-alloy steels] //Zashhita metallov. 2004. T. 40. №5. S. 498–503.
  27. Filippov G.A., Rodionova I.G., Baklanova O.N. Korrozionnaja stojkost' stal'nyh trubo-provodov [Corrosion resistance of steel pipelines] //Tehnologija metallov. 2004. №2. S. 24–27.
  28. Rodionova I.G., Baklanova O.N., Filippov G.A. i dr. Rol' nemetallicheskih vkljuchenij v uskorenii processov lokal'noj korrozii neftepromyslovyh truboprovodov i drugih vidov metalloprodukcii i oborudovanija iz uglerodistyh i nizkolegirovannyh stalej [Role of non-metallic inclusions in acceleration of processes of local corrosion of oil-field pipelines and other types of steel products and the equipment from carbonaceous and low-alloy steels]. M.: Metallurgizdat. 2005. S. 7–14.
  29. Semenychev V.V. Korrozionnaja stojkost' listov splava D16ch.-T v morskih subtropikah [Corrosion resistance of sheets of alloy Д16ч.-T in sea subtropics] //Trudy VIAM. 2014. №7. St. 11 (viam-works.ru).