Carrying out tests for resistance to lightnings of the experimental and constructive and similar samples executed from carbon plastic, with covering protected from lightnings

Gunyaeva A.G., Cherfas L.V., Komarova O.A., Kuprienko V.M.
UDC
620.1:678.747.2
DOI
10.18577/2307-6046-2017-0-7-10-10
Article PDF (Russian) (995.33 KB)
How to cite
Gunyaeva A.G., Cherfas L.V., Komarova O.A., Kuprienko V.M. Carrying out tests for resistance to lightnings of the experimental and constructive and similar samples executed from carbon plastic, with covering protected from lightnings // Proceedings of VIAM. 2017. No. 7. DOI: 10.18577/2307-6046-2017-0-7-10-10. URL: https://test.viam.ru/en/journal/2017/7/10
Keywords
polymeric composite materials (PCM), lightning strike protection coating, CFRP, tests for resistance to lightning strike.
Abstract

Polymeric composite materials (PKM) find the application in different areas of the industry and equipment. In the aviation industry use of new and advanced materials, such as PKM, leads to increase of efficiency of flight vehicles, namely decrease in weight of design. However, with increase in application of PKM in designs of flight vehicles (LA) there was question of their protection against accumulation of static electricity in and lightning strike protection in the conditions of the storm front when flying. In article process of carrying out tests of experimental samples and constructive and similar samples is described – fragments of prototype of the panel covered from CFRP with the lightning strike protection coating (MZP) of the VKU-53MZ developed in FGUP «VIAM», order and methods of carrying out tests, the assessment of firmness of the developed material VKU-52MZ to influence of the electric discharge simulating impulse of lightning current is given.

Reference list
  1. Kablov E.N. Tendencii i orientiry innovacionnogo razvitiya Rossii: sb. nauch.-informac. materialov. 3-e izd. [Tendencies and reference points of innovative development of Russia: collection of scientific information materials. 3rd ed.]. M.: VIAM, 2015. 720 s.
  2. Gunyaev G.M., Chursova L.V., Raskutin A.E., Komarova O.A., Gunyaeva A.G. Konstrukcionnye polimernye uglenanokompozity – novoe napravlenie materialovedeniya [Constructional polymeric carbon nanocomposites are the new direction of materials science] // Vse materialy. Enciklopedicheskij spravochnik. 2011. №12. S. 2–9.
  3. Kablov E.N. Kompozity: segodnya i zavtra [Composites: today and tomorrow] // Metally Evrazii. 2015. №1. S. 36–39.
  4. Sidorina A.I., Gunyaeva A.G. Rynok uglerodnyh volokon i kompozitov na ih osnove (obzor) [The market of carbon fibers and composites on their basis (overview)] // Himicheskie volokna. 2016. №4. S.48–53.
  5. Kurnosov A.O., Melnikov D.A. Harakteristiki stekloplastikov na osnove vysokodeformativnyh rasplavnyh svyazuyushhih v usloviyah vozdejstviya ekspluatacionnyh faktorov [Characteristics of fibreglasses on the basis of highly deformation molten operational factors binding in the conditions of influence] // Vse materialy. Enciklopedicheskij spravochnik. 2015. №11. S. 14–18.
  6. Gunyaev G.M., Chursova L.V., Raskutin A.E., Nachinkina G.V., Gunyaeva A.G., Kuprienko V.M. Molniezashhitnye pokrytiya dlya konstrukcionnyh ugleplastikov, soderzhashhie nanochasticy [Lightning protecting covers for constructional carbon plastics, containing nanoparticles] // Vse materialy. Enciklopedicheskij spravochnik. 2012. №3. S. 24–35.
  7. Gunyaeva A.G., Chursova L.V., Komarova O.A., Cherfas L.V. Molniestojkie uglenanokompozity, modificirovannye nanochasticami, izgotovlennye sposobom infuzionnogo formovaniya [Lightning the carbon nanocomposites resistant modified by nanoparticles, made in the way of infusional formation] // Vse materialy. Enciklopedicheskij spravochnik. 2015. №10. C. 25–32.
  8. Gunyaev G.M., Chursova L.V., Raskutin A.E., Gunyaeva A.G. Molniestojkost sovremennyh polimernyh kompozitov [Lightning firmness of modern polymeric composites] // Aviacionnye materialy i tehnologii. 2012. №2. S. 36–42.
  9. Gunyaev G.M., Chursova L.V., Komarova O.A., Gunyaeva A.G. Konstrukcionnye ugleplastiki, modificirovannye nanochasticami [Constructional carbon the plastics modified by nanoparticles] // Aviacionnye materialy i tehnologii. 2012. №S. S. 277–286.
  10. Gunyaeva A.G., Cherfas L.V., Komarova O.A., Fedotov M.Yu. Izyskanie putej sozdaniya molniezashhitnogo pokrytiya na osnove uglerodnoj tkani s metallicheskimi vklyucheniyami i vozmozhnosti ego primeneniya v elemente konstrukcii kryla LA, vypolnennogo iz ugleplastika [Research of ways of creation of lightning protecting cover on the basis of carbon fabric with metal inclusions and possibilities of its application in element of design of wing of LA executed from carbon plastic] // Fundamentalnye nauchnye osnovy sovremennyh kompleksnyh metodov issledovanij i ispytanij materialov, a takzhe elementov konstrukcij: sb. mater. molodezh. konf. M.: VIAM, 2015. S. 6.
  11. Zheleznyak V.G., Chursova L.V. Modifikaciya svyazujushhih i matric na ih osnove s celyu povysheniya vyazkosti razrusheniya [Modification of binders and matrixes based on them to increase fracture toughness] // Aviacionnye materialy i tehnologii. 2014. №1. S. 47–50. DOI: 10.18577/2071-9140-2014-0-1-47-50.
  12. Gulyaev I.N., Gunyaeva A.G., Raskutin A.E., Fedotov M.Yu., Sorokin K.V. Molniezashhita i vstroennyj kontrol dlya konstrukcij iz PKM [Lightning protection and the built-in control for designs from PCM] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №4. St. 10. Available at: http://www.viam-works.ru (accessed: April 10, 2017).
  13. Panel iz polimernogo kompozicionnogo materiala s molniezashhitnym pokrytiem: pat. 2588552 Ros. Federaciya [The panel from polymeric composite material from lightning protecting cover: pat. 2588552 Rus. Federation]; zayavl. 03.06.15; opubl. 27.06.16, Byul. №18. 10 s.
  14. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030»] // Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
  15. Normy letnoj godnosti samoletov transportnoj kategorii: AP-25 [Standards of the flight validity of airplanes of transport category]: utv. Postanovleniem 28-j Sessii po aviacii i ispolzovaniyu vozdushnogo prostranstva 11.12.2008. 3-e izd. s popravkami 1–7. M.: Aviaizdat. 2014. S. 71–72.
  16. Kvalifikacionnye trebovaniya KT 160D. Usloviya ekspluatacii i okruzhayushhej sredy dlya bortovogo aviacionnogo oborudovaniya. Razdel 23. Pryamoe vozdejstvie molnii. Aviacionnyj reestr mezhgosudarstvennogo aviacionnogo komiteta [Qualifying requirements of KT 160Д. Operating conditions and environment for aircraft air equipment. Section 23. Direct influence of lightning. Aviation register of interstate aviation committee]. Armak, 2004. 324 s.
  17. Buharov S.V., Gunyaeva A.G., Raskutin A.E. Issledovaniya zony porazheniya molniezashhitnogo pokrytiya iz ugleplastikov vysokovoltnymi razryadami, imitiruyushhimi toki molnii [Researches of zone of defeat of lightning protective covering from carbon plastic the high-voltage discharges simulating lightning currents] // Nauchnye trudy (Vestnik «MATI»). 2014. №22 (94). S. 4–14.
  18. Gunyaeva A.G., Chursova L.V., Fedotov M.Yu., Cherfas L.V. Issledovanie vliyaniya molnievogo razryada na ugleplastik s nanomodificirovannym molniezashhitnym pokrytiem i sistemoj vstroennogo kontrolya na osnove volokonnyh breggovskih reshetok [Research of influence of lightning discharge on carbon plastic with the nanomodified lightning protective covering and system of the built-in control on the basis of fiber Bragg grids] // Voprosy materialovedeniya. 2016. №1 (85). C. 80–91.
  19. Murashov V.V., Generalov A.S. Kontrol izdelij iz PKM i mnogoslojnyh kleenyh konstrukcij ultrazvukovymi metodami otrazheniya [PCM products and multilayer glued structures testing by ultrasonic reflection methods] // Aviacionnye materialy i tehnologii. 2017. №1. S. 69–74. DOI: 10.18577/2071-9140-2017-0-1-69-74.
  20. Boychuk A.S., Generalov A.S., Stepanov A.V. Nerazrushayushhij kontrol ugleplastikov na nalichie nesploshnostej s ispolzovaniem ultrazvukovyh fazirovannyh reshetok [NDT monitoring of CFRP structural health by ultrasonic phased array technique] // Aviacionnye materialy i tehnologii. 2015. №3 (36). S. 84–89. DOI: 10.18577/2071-9140-2015-0-3-84-89.
  21. Melnikov D.A., Gromova A.A., Raskutin A.E., Kurnosov A.O. Teoreticheskij raschet i eksperimentalnoe opredelenie modulya uprugosti i prochnosti stekloplastika VPS-53/120 [Theoretical calculation and experimental determination of modulus of elasticity and strength of GRP VPS-53/120] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2017. №1 (49). St. 08. Available at: http://www.viam-works.ru (accessed: April 17, 2017). DOI: 10.18577/2307-6046-2017-0-1-8-8.
  22. Cherfas L.V., Gunyaeva A.G., Komarova O.A., Antyufeeva N.V. Analiz sroka godnosti nanomodificirovannogo preprega pri hranenii po ego reakcionnoj sposobnosti [The analysis of nanomodified prepreg shelf life by its reactivity at storage] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2016. №1 (37). St. 12. Available at: http://www.viam-works.ru (accessed: April 19, 2017). DOI: 10.18577/2307-6046-2016-0-1-12-12.