Investigation of the physicomechanical properties and microstructure of volume-reinforced carbon fiber reinforced plastic

Evdokimov A.A., Gulyaev I.N., Zelenina I.V.
UDC
678.8
DOI
10.18577/2307-6046-2019-0-4-38-47
Article PDF (Russian) (344.57 KB)
How to cite
Evdokimov A.A., Gulyaev I.N., Zelenina I.V. Investigation of the physicomechanical properties and microstructure of volume-reinforced carbon fiber reinforced plastic // Proceedings of VIAM. 2019. No. 4. DOI: 10.18577/2307-6046-2019-0-4-38-47. URL: https://test.viam.ru/en/journal/2019/4/5
Keywords
carbon-fiber reinforced plastic, volume-reinforced preform, filament.
Abstract

Devoted to the study of the dependence of the physicomechanical properties of carbon-fiber reinforced plastic made using volume-reinforced preform on the type of weaving of fibers in the preform. It is shown that carbon fiber reinforced plastic obtained on the basis of the preforms of the orthogonal structure has better characteristics than carbon fiber reinforced plastic obtained on the basis of the preforms of the satin reinforcement structure.Micrographs of the obtained carbon fiber reinforced plastic and micrographs of individual filaments of carbon fiber used are shown.Recommendations are given to improve the values of the physicomechanical characteristics of the materials under study.

Reference list
  1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030»] // Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
  2. Kablov E.N. Kompozity: segodnya i zavtra [Composites: today and tomorrow] // Metally Evrazii. 2015. №1. S. 36–39.
  3. Kablov E.N. Materialy novogo pokoleniya [New generation materials] // Zashchita i bezopasnost. 2014. №4. S. 28–29.
  4. Mohamed M.H., Bogdanovich А.Е. Comparetive analysis of different 3D weaving processes, machines and products // In: ICCM 17, 3D Textiles & Composites. Edinburgh, 2009.
  5. McClain M., Goering J. Overview of Recent Developments in 3D Structures // ICCM 17, 3D Textiles & Composites. Edinburgh, 2009.
  6. Lomov S.V., Ivanov D.S., Perie G., Verpoest I. Modelling 3D-fabrics and 3D-reinforced Composites // Challenges and Solutions: World Conference on 3D-fabrics. Manchester, 2008.
  7. Donetski K.I., Raskutin A.E., Khilov P.A., Lukyanenko Yu.V., Belinis P.G., Korotigin A.A. [Volumetric braided and woven textile preforms used for manufacturing of fiber reinforced polymer composite materials (review)] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №9. St. 10. Available at: http://www.viam-works.ru (accessed: December 18, 2018). DOI: 10.18577/2307-6046-2015-0-9-10-10
  8. Vlasenko F.S., Raskutin A.E., Doneckij K.I. Primenenie pletenyh preform dlya polimernyh kompozicionnyh materialov v grazhdanskih otraslyah promyshlennosti (obzor) [Application of braided preforms for polymer composite materials in civil industries (review)] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №1. St. 05. Available at: http://www.viam-works.ru (accessed: December 18, 2018). DOI: 10.18577/2307-6046-2015-0-1-5-5.
  9. Donetskij K.I., Hrulkov A.V., Kogan D.I., Belinis P.G., Lukyanenko Yu.V. Primenenie obemno-armiruyushhih preform pri izgotovlenii izdelij iz PKM [Use of three-dimensional reinforcing preforms during the production of polymer composite products] // Aviacionnye materialy i tehnologii. 2013. №1. S. 35–39.
  10. Kompozitnaya lopatka ventilyatora s mnogosloynym armiruyushchim materialom: pat. 2384749 Ros. Federatsiya. №2008144475/06 [Composite fan blade with multi-layer reinforcing material: Pat. 2384749 Rus. Federation. No. 2008144475/06]; zayavl. 11.11.08; opubl. 20.03.10.
  11. Karimbayev T.D., Luppov A.A., Afanasyev D.V. Rabochiye lopatki ventilyatorov dlya perspektivnykh dvigateley [Blades for advanced engines] // Dvigatel. 2011. №6. S. 2–10.
  12. Zelenina I.V., Gulyayev I.N., Kucherovskiy A.I., Mukhametov R.R. Termostoykiye ugleplastiki dlya rabochego kolesa tsentrobezhnogo kompressora [Heat-resistant CFRP for the impulse wheel of the centrifugal compressor] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2016. №2 (38). St. 08. Available at: http://www.viam-works.ru (accessed: December 18, 2018). DOI: 10.18577/2307-6046-2016-0-2-8-8.
  13. Zheleznyak V.G., Muhametov R.R., Chursova L.V. Issledovanie vozmozhnosti sozdaniya termoreaktivnogo svyazujushhego na rabochuju temperaturu do 400°C [Study of possibility of thermoset binder creation for operating temperature up to 400°C] // Aviacionnye materialy i tehnologii. 2013. №S2. S. 58–61.
  14. Shimkin A.A., Ponomarenko S.A., Mukhametov R.R. Issledovaniye protsessa otverzhdeniya diftalonitrilnogo svyazuyushchego [nvestigation of the process of curing diphthalonitrile binder] // Zhurnal prikladnoy khimii. 2016. T. 89. №2. S. 256–264.
  15. Guseva M.A. Cianovye efiry – perspektivnye termoreaktivnye svyazujushhie (obzor) [Cyanic esters are prospective thermosetting binders (review)] // Aviacionnye materialy i tehnologii. 2015. №2 (35). S. 45–50.
  16. Valevin E.O., Zelenina I.V., Marakhovskiy P.S., Gulyayev A.I., Bukharov S.V. Issledovaniye vliyaniya teplovlazhnostnogo vozdeystviya na ftalonitrilnuyu matritsu [Investigation of the influence of heat and humidity effects on the phthalonitrile matrix] // Materialovedeniye. 2015. №9. S.15–19.
  17. Raskutin A.E. Rossiiskie polimernye kompozitsionnye materialy novogo pokoleniia, ikh osvoenie i vnedrenie v perspektivnykh razrabatyvaemykh konstruktsiiakh [Russian polymer composite materials of new generation, their exploitation and implementation in advanced developed constructions] // Aviacionnye materialy i tehnologii. 2017. №S. S. 349–367. DOI: 10.18577/2071-9140-2017-0-S-349-367.
  18. Grashchenkov D.V. Strategiya razvitiya nemetallicheskih materialov, metallicheskih kompozicionnyh materialov i teplozashhity [Strategy of development of non-metallic materials, metal composite materials and heat-shielding] // Aviacionnye materialy i tehnologii. 2017. №S. S. 264–271. DOI: 10.18577/2071-9140-2017-0-S-264-271.