Features of the structure and reinforcement transmission shafts made of polymer composite materials (review)

Goncharov V.A., Usacheva M.N., Khrulkov A.V.
UDC
678.8
DOI
10.18577/2307-6046-2021-0-1-85-96
Article PDF (Russian) (573.39 KB)
How to cite
Goncharov V.A., Usacheva M.N., Khrulkov A.V. Features of the structure and reinforcement transmission shafts made of polymer composite materials (review) // Proceedings of VIAM. 2021. No. 1. DOI: 10.18577/2307-6046-2021-0-1-85-96. URL: https://test.viam.ru/en/journal/2021/1/9
Keywords
polymer composite materials, transmission shafts, reinforcement, carbon fiber reinforced plastic, fiberglass, binder, modification.
Abstract

A transmission shaft is required to transfer power from the engine to the axle and drive wheel in a rear wheel drive vehicle. A composite shaft has many advantages: greater length compared to a metal shaft, improved mechanical properties, less noise, vibration and weight. By adjusting the resin composition and the fiber reinforcement pattern, the mechanical properties of the transmission shaft can be improved. Various options for modifying carbon and fiberglass plastics to improve the characteristics of the shaft are considered.

Reference list
  1. Kablov E.N. VIAM: new generation materials for PD-14. Krylya Rodiny, 2019, no. 7-8, pp. 54–58.
  2. Kablov E.N. Marketing of Materials Science, Aircraft and Industry: Present and Future. Direktor po marketingu i sbytu, 2017, no. 5-6, pp. 40–44.
  3. Kablov E.N. Materials and chemical technologies for Aircraft Engineering. Herald of the Russian Academy of Sciences, 2012, vol. 82, no. 3, pp. 158–167.
  4. Imametdinov E.S., Valueva M.I. Сomposites for piston engines (rеview). Aviacionnye materialy i tehnologii, 2020, no. 3 (60), pp. 19–28. DOI: 10.18577/2071-9140-2020-0-3-19-28.
  5. Zhelezina G.F., Solovyeva N.A., Makrushin K.V., Rysin L.S. Polymer composite materials for manufacturing engine air particle separation of advanced helicopter engine. Aviacionnye materialy i tehnologii, 2018, no. 1 (50), pp. 58–63. DOI: 10.18577/2071-9140-2018-0-1-58-63.
  6. Kondrashov S.V., Shashkeev K.A., Petrova G.N., Mekalina I.V. Constructional polymer composites with functional properties. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 405–419. DOI: 10.18577/2071-9140-2017-0-S-405-419.
  7. Aristova Е.Yu., Denisova V.А., Drozhzhin V.S. et al. Composite materials using hollow microspheres. Aviacionnye materialy i tehnologii, 2018, no. 1 (50), pp. 52–57. DOI: 10.18577/2071-9140-2018-0-1-52-57.
  8. Khrulkov A.V., Timoshkov P.N., Yazvenko L.N., Usacheva M.N. Composite materials for medical and biological purposes (review). Novosti materialovedeniya: nauka i tekhnika, 2018, no. 3–4, paper no. 05. Available at: https://materialsnews.ru (accessed: October 15, 2020).
  9. Compositesworld: CompoTech launches standard range for carbon finer epoxy beams. Available at: https://www.compositesworld.com/products/compotech-launches-standard-range-for-carbon-finer-epoxy-beams (accessed: September 15, 2020).
  10. Mallick P.K., Newman S. Composite materials technology. Hanser Publishers, 1990, p. 206–210.
  11. Sino R., Baranger T.N., Chatelet E., Jacquet G. Dynamic analysis of a rotating composite shaft. Composite Science and Technology, 2008, vol. 68, pp. 337–345.
  12. Kotynia R., Cholostiakow S. New Proposal for Flexural Strengthening of Reinforced Concrete Beams Using CFRP T-Shaped Profiles. Polymers-Basel, 2015, vol. 7, pp. 2461–2477.
  13. Khalid Y.A., Mutasher S.A., Sahari B.B., Hamouda A.M.S. Bending fatigue behavior of hybrid aluminum/composite drive shafts. Materials & Design, 2007, vol. 28, pp. 329–334.
  14. Timoshkov P.N., Hrulkov A.V., Grigoreva L.N. Сarbon fiber transmission shaft. Materials and technology (review). Trudy VIAM, 2020, no. 8 (90), paper no. 05. Available at: http://www.viam-works.ru (accessed: September 30, 2020). DOI: 10.18577/2307-6046-2020-0-8-46-53.
  15. Gay D., Hoa S.V., Tsai S.W. Composite materials: design and application. CRC press, 2004, 552 p.
  16. Shoaib Nadeem S.K., Giridhara G., Rangavittal H.K. A Review on the design and analysis of composite drive shaft. Materials Today: Proceedings, 2018, no. 5, pp. 2738–2741.
  17. Abu Talib A., Ali A., Badie M., Azida Che Lah N., Golestaneh A. et al. Developing a hybrid epoxy composite automotive drive shaft. Materials & Design, 2010, vol. 31 (1), pp. 514–521.
  18. Montagnier O., Hochard C. Optimisation of hybrid high-modulus/high-strength carbon fibre reinforced plastic composite drive shafts. Materials & Design, 2013, vol. 46, pp. 88–100.
  19. Schmelz F., Seherr Thoss, Aucktor E. Universal joints and drive shafts. New York: Springer-Verlag, 1992, 251 p.
  20. Cho D.H., Lee D.G., Choi J.H. Manufacturing of one-piece automotive drive shafts with aluminum and composite materials. Composite Structures, 1997, vol. 38, pp. 309–319.
  21. Lee D.G., Kim H.S., Kim J.W., Kim J.K. Design and manufacture of an automotive hybrid aluminum/composite drive shaft. Composite Structures, 2004, vol. 63, pp. 87–99.
  22. A method of obtaining prepreg: pat. SU892930A1 USSR. No. 2795649/05; filed. 11.07.79; publ. 15.02.91.
  23. Gunyaev G.M., Kablov E.N., Aleksashin V.M. Modification of structural carbon plastics with carbon nanoparticles. Rossiyskiy khimicheskiy zhurnal, 2010, vol. LIV, no. 1, pp. 5–11.
  24. 3M: 3M™ Matrix Resin 3831. Available at: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Matrix-Resin-3831/?N=5002385+3292653729&rt=rud (accessed: September 30, 2020).
  25. Timoshkov P.N., Khrulkov A.V., Usacheva M.N., Purvin K.E. Technological features of the manufacture of thick-walled parts of the PCM (review). Trudy VIAM, 2019, no. 3 (75), paper no. 07. Available at: http://viam-works.ru (accessed: October, 15 2020). DOI: 10.18577/2307-6046-2019-0-3-61-67.
  26. Timoshkov P.N., Usacheva M.N., Khrulkov A.V. Stickiness and possibility of using prepregs for automated technologies (review). Trudy VIAM, 2018, no. 8 (68), paper no. 04. Available at: http://www.viam-works.ru (accessed: October 01, 2020). DOI: 10.18577/2307-6046-2018-0-8-38-46.
  27. Suresh G., Jayakumari L.S. Analyzing the mechanical behavior of E-Glass fibre reinforced interpenetrating polymer network composite pipe. Journal of Composite Materials, 2016, vol. 50, pp. 3053–3061.
  28. Masaru Z., Yasutomo U., Tetsusei K. Finite element analysis of damaged woven fabric composite materials. Composites Science and Technology, 2003, vol. 63, pp. 507–516.
  29. Zhang Y.X., Yang C.H. Recent developments in finite element analysis for laminated composite plates. Computers & Structures, 2009, vol. 88, p. 147–157.
  30. Suresh G., Ganesh B.L., Bharani K.S., Rajesh K.K. Influence of water absorption on glass fibre reinforced IPN composite pipes. Polímeros: Ciência e Tecnologia, 2019, vol. 29 (3), pp. 2019–2038.
  31. Suresh G., Srinivasan T., Stephen Bernard S., Sekaran V. Analyzing the mechanical behavior of IPN composite drive shaft with E-glass fiber reinforcement. Materials Today: Proceedings, 2020. Available: https://www.sciencedirect.com/science/article/pii/S2214785320319787 (accessed: September 25, 2020).
  32. Popov Yu.O., Kolokoltseva T.V., Bespalova L.S., Khrulkov A.V., Kogan D.I. Fiberglass VPS-31 and hybrid composite material VKG-5 made of unidirectional prepregs based on melt binder and braided carbon and glass fillers. Aviacionnye materialy i tehnologii, 2006, no. 1, pp. 10–20.
  33. Carbon fiber reinforced composite drive shaft: pat. US4171626A, no. 890232; filed 27.03.78; publ. 23.10.79.
  34. Kim H.S., Park S.W., Hwang H.Y., Lee D.G. Effect of the smart cure cycle on the performance of the co-cured aluminum/composite hybrid shaft. Composite Structures, 2006, vol. 75, pp. 276–88.
  35. Shokrieh M.M., Hasani A., Lessard L.B. Shear buckling of a composite drive shaft under torsion. Composite Structures, 2004, vol. 64, pp. 63–69.
  36. Eksi S., Kapti A.O., Genel K. Buckling behavior of fiber reinforced plastic-metal hybrid-composite beam. Materials & Design, 2013, vol. 49, pp. 130–138.
  37. Rafiee R. On the mechanical performance of glass-fibre-reinforced thermosetting resin pipes: A review. Composite Structures, 2016, vol. 143, pp. 151–164.
  38. Eyer G., Montagnier O., Charles J.P., Hochard C. Design of a composite tube to analyze the compressive behavior of CFRP. Composites Part A: Applied Science and Manufacturing, 2016, vol. 87, pp. 115–122.
  39. Ravi A. Design, Comparison and Analysis of a Composite Drive Shaft for an Automobile. International Review of Applied Engineering Research, 2014, vol. 4 (1), pp. 21–28.
  40. Bhajantri V.S., Bajantri S.C., Shindolkar A.M., Amarapure S.S., Roll K. Design and Analysis of Composite Drive Shaft. International Journal of Research in Engineering and Technology, 2014, vol. 3 (3), pp. 738–745.
  41. Khoshravan M.R., Paykani A. Design of a Composite Drive Shaft and its Coupling for Automotive Application. Journal of Applied Research and Technology, 2012, vol. 10, pp. 826–834.
  42. Xu F.-J., Ye J.-R., Xue Y.-D. Design and mechanical analysis of a hybrid composite drives haft. Composite Structure, 1991, vol. 9, pp. 207–216.
  43. Gubran H.B.H. Dynamics of hybrid shafts. Mechanical Research Communications, 2005, vol. 32 (4), pp. 368–74.
  44. Badie M.A., Mahdi E., Hamouda A.M.S. An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft. Materials & Design, 2011, vol. 32 (3), pp. 1485–1500.
  45. Hua F.J., Hu C.P. Interpenetrating polymer networks of epoxy resin and urethane acrylate resin: 2. Morphology and mechanical property. European Polymer Journal, 2000, vol. 36, pp. 27–33.
  46. Rangaswamy T., Vijayarangan S. Optimal Sizing and Stacking Sequence of Composite Drive Shafts. International Journal of Materials Science, 2005, vol. 11, no. 2, pp. 1392–1320.
  47. Badie M.A., Mahdi A., Abu Talib R., Abdullah E.J., Yonus R. Automotive Composite Drive Shafts: Investigation of The Design Variables Effects. International Journal of Engineering and Technology, 2006, vol. 3, no. 2, pp. 227–237.
  48. Satheesh Kumar Reddya P., Nagaraju Ch. Weight optimization and Finite Element Analysis of Composite automotive drive shaft for Maximum Stiffness. Materials Today: Proceedings, 2017, vol. 4, pp. 2390–2396.
  49. Montagnier O., Hochard C. Compression characterization of high modulus carbon fibers. Journal of Composite Materials, 2005, vol. 39, pp. 35–49.
  50. Hochard C., Payan J., Montagnier O. Design and computation of laminated composite structures. Composites Science and Technology, 2005, vol. 65, pp. 467–474.
  51. Montagnier O., Hochard C. Dynamics of a supercritical composite shaft mounted on viscoelastic supports. Journal of Sound and Vibration, 2014, vol. 333, pp. 470–484.
  52. Khalifa A.B., Zidi M., Abdelwahed L. Mechanical characterization of glass/vinylester ±55° filament wound pipes by acoustic emission under axial monotonic loading. Comptes Rendus – Mecanique, 2012, vol. 340, pp. 453–460.
  53. Yazdani Sarvestani H., Naghashpour A., Gorjipoor A. A simple-input method to analyze thick composite tubes under pure bending moment reinforced by carbon nanotubes. Composites, part B: Engineering, 2016, vol. 87, pp. 149–160.
  54. Sun Z., Xiao J., Yu X., Tusiime R. et al. Vibration characteristics of carbon-fiber reinforced composite drive shafts fabricated using filament winding technology. Composite Structures, 2020, vol. 241, pp. 1117–1125.
  55. Kim H.S., Kim B.C., Lim T.S., Lee D.G. Foreign objects impact damage characteristics of aluminum/composite hybrid drive shaft. Composite Structures, 2004, vol. 66, pp. 377–89.
  56. Lee D.G., Sung K.H., Woon K.J., Kook K.J. Design and manufacture of an automotive hybrid aluminum/composite drive shaft. Composite Structures, 2004, vol. 63, pp. 87–99.
  57. Mutasher S.A. Prediction of the torsional strength of the hybrid aluminum/composite drive shaft. Materials & Design, 2009, vol. 30, pp. 215–220.
  58. Chopde P.V., Barjibhe R.B. Analysis of Carbon/Epoxy Composite Drive Shaft for Automotive Application. International Journal of Latest Trends in Engineering and Technology, 2015, vol. 5 (1), pp. 101–111.
  59. Kim B., Oh S., Park S. Manufacture of elastic composite ring for planetary traction drive with silicon rubber and carbon fiber. Composite Structures, 2004, vol. 66, pp. 543–546.
  60. Chang C.Y., Chang M.Y., Huang J.H. Vibration analysis of rotating composite shafts containing randomly oriented reinforcements. Composite Structures, 2004, vol. 63, pp. 21–32.
  61. Mendonça W., Coelho de Medeiros E., Rezende A., Mathias M.H. The dynamic analysis of rotors mounted on composite shafts with internal damping. Composite Structures, 2017, vol. 167, pp. 50–62.
  62. Henry T.C., Bakis C.E., Smith E.C. Viscoelastic characterization and self-heating behavior of laminated fiber composite driveshafts. Materials & Design, 2015, vol. 66, pp. 346–55.
  63. Qatu M.S., Iqbal J. Transverse vibration of a two-segment cross-ply composite shafts with a lumped mass. Composite Structures, 2010, vol. 92, pp. 1126–1131.
  64. Sevkat E., Tumer H., Halidun Kelestemur M., Dogan S. Effect of torsional strain-rate and lay-up sequences on the performance of hybrid composite shafts. Materials & Design, 2014, vol. 60, pp. 310–319.
  65. Donetskiy K.I., Karavayev R.YU., Raskutin A.Ye., Dun V.A. Carbon fibers composite material on the basis of volume reinforcing triax braiding preformes. Trudy VIAM, 2019, no. 1 (73), paper no. 07. Available at: http://viam-works.ru (accessed: September 25, 2020). DOI: 10.18577/2307-6046-2019-0-1-55-63.
  66. Donetski K.I., Raskutin A.E., Khilov P.A., Lukyanenko Yu.V., Belinis P.G., Korotigin A.A. Volumetric braided and woven textile preforms used for manufacturing of fiber reinforced polymer composite materials (review). Trudy VIAM, 2015, no. 9, paper no. 10. Available at: http://www.viam-works.ru (accessed: September 25, 2020). DOI: 10.18577/2307-6046-2015-0-9-10-10.
  67. Donetskiy K.I., Bystrikova D.V., Karavaev R.Yu., Timoshkov P.N. Application of polymeric composite materials for creation of elements of transmissions of aviation engineering (review). Trudy VIAM, 2020, no. 3 (87), paper no. 09. Available at: http://www.viam-works.ru (accessed: September 25, 2020). DOI: 10.18577/2307-6046-2020-0-3-82-93.