The influence of environmental factors on the characteristics of antifriction organoplasty orgalon AF-1M

Kan A.Ch., Kulagina G.S., Ayupov T.R., Zhelezina G.F.
UDC
678.83
DOI
10.18577/2307-6046-2022-0-3-91-101
Article PDF (Russian) (657.71 KB)
How to cite
Kan A.Ch., Kulagina G.S., Ayupov T.R., Zhelezina G.F. The influence of environmental factors on the characteristics of antifriction organoplasty orgalon AF-1M // Proceedings of VIAM. 2022. No. 3. DOI: 10.18577/2307-6046-2022-0-3-91-101. URL: https://test.viam.ru/en/journal/2022/3/9
Keywords
antifriction organic plastics, climatic factors, sliding bearings, adhesion
Abstract

The influence of climatic factors, water and industrial fluids on the strength of the connection of antifriction organic plastics with a metal base is investigated. It was found that the preservation of the shear strength of the binder AFK-101 and the strength when peeling the organic plastics from the metal substrate are 60–82 % after prolonged exposure in these environments, which indicates the reliability of the connection of the antifriction organic plastics with the metal substrate in the composition of heavily loaded plain bearings during operation under the influence of environmental factors

Reference list
  1. Kablov E.N., Startsev V.O. Climatic aging of polymer composite materials for aviation purposes. I. Evaluation of the influence of significant factors of influence. Deformatsiya i razrusheniye materialov, 2019, no. 12, pp. 7–16.
  2. Mukhametov R.R., Petrova A.P., Ponomarenko S.A. Anti-adhesive coatings and their properties. Trudy VIAM, 2018, no. 12 (72), paper no. 10. Available at: http://www.viam-works.ru (accessed: November 16, 2021). DOI: 10.18577/2307-6046-2018-0-12-88-96.
  3. Silaeva A.A., Kuznetsova V.A., Zheleznyak V.G., Kurshev E.V. Research of adhesion and adhesive durability of functional paint coatings for protection of polimer composite surface. Trudy VIAM, 2021, no. 9 (103), paper no. 06. Available at: http://www.viam-works.ru (accessed: November 16, 2021). DOI: 10.18577/2307-6046-2021-0-9-59-66.
  4. Kulagina G.S., Korobova A.V., Ilichev A.V., Zhelezina G.F. Physical and physico-mechanical properties of antifriction organoplastics based on combined fabric filler and epoxy binder. Trudy VIAM, 2017, no. 10 (58), paper no. 08. Available at: http://www.viam-works.ru (accessed: November 16, 2021). DOI: 10.18577/2307-6046-2017-0-10-8-8.
  5. Solomentseva A.V., Fadeeva V.M., Zhelezina G.F. Antifriction organoplastics for heavy loaded sliding friction units of aircraft structures. Aviacionnye materialy i tehnologii, 2016, no. 2, pp. 30–34. DOI: 10.18577/2071-9140-2016-0-2-30-34.
  6. Mashkov Yu.K., Ovchar Z.N., Baibaratskaya M.Yu., Mamaev O.A. Polymer composite materials in tribotechnics. Moscow: Nedra-Businesscenter, 2004, 262 p.
  7. Voronkov B.D. Dry friction bearings. Leningrad: Mashinostroenie, 1979, 224 p.
  8. Yudin A.S. Development of wear-resistant, anti-friction organo-textolites based on polyoxadiazole fabrics and polymer-mineral modifiers: thesis abstract, Cand. Sc. (Tech.). Moscow: INEOS RAN, 2013. 20 p.
  9. Adamenko N.A., Agafonova G.V. Tribotechnical polymeric materials. Volgograd: VolgGTU, 2013, 107 p.
  10. Bobarikin Yu.L., Shishkov S.V. Method for manufacturing a strip antifriction metal-fluoroplastic material. Vestnik Gomelskogo gosudarstvennogo tekhnicheskogo universiteta im. P.O. Sukhogo, 2011, no. 3, pp. 3–9.
  11. Kablov E.N., Startsev O.V. The basic and applied research in the field of corrosion and ageing of materials in natural environments (review). Aviacionnye materialy i tehnologii, 2015, no. 4 (37), pp. 38–52. DOI: 10.18577/2071-9140-2015-0-4-38-52.
  12. Kablov E.N., Startsev V.O. Systematical analysis of the climatics influence on mechanical properties of the polymer composite materials based on domestic and foreign sources (review). Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 47–58.
  13. Kablov E.N., Startsev V.O., Krotov A.S., Kirillov V.N. Climatic aging of aviation composite materials. III. Significant factors of aging. Deformatsiya i razrusheniye materialov, 2011, no. 1, pp. 34–40.
  14. Petrova A.P., Malysheva G.V. Adhesives, adhesive binders and adhesive prepregs: textbook. Ed. E.N. Kablov. Moscow: VIAM, 2017. 472 p.
  15. Kablov E.N. Materials for aerospace engineering. Vse materialy. Entsiklopedicheskiy spravochnik, 2007, no. 5, pp 7–27.
  16. Kablov E.N. Materials and chemical technologies for aviation equipment. Vestnik Rossiyskoy akademii nauk, 2012, vol. 82, no. 6, pp. 520–530.
  17. Gulyaev A.I., Medvedev P.N., Sbitneva S.V., Petrov A.A. Experimental research of «fiber–matrix» adhesion strength in carbon fiber epoxy/polysulphone composite. Aviacionnye materialy i tehnologii, 2019, no. 4 (57), pp. 80–86. DOI: 10.18577/2071-9140-2019-0-4-80-86.
  18. Kablov E.N., Kulagina G.S., Zhelezina G.F., Lonskii S.L., Kurshev E.V. Microstructure research of the unidirectional organoplastic based on Rusar-NT aramid fibers and epoxy-polysulfone binder. Aviacionnye materialy i tehnologii, 2020, no. 4 (61), pp. 19–26. DOI: 10.18577/2071-9140-2020-0-4-19-26.
  19. Anisimov A.V., Bakhareva V.E., Balyshko I.V. et al. Characteristics of organoplastics based on a phenol matrix and oxolane fiber. Voprosy materialovedeniya, 2006, no. 2, pp. 113–118.
  20. Yakovlev A.L., Nochovnaya N.A., Putyrskij S.V., Krohina V.A. Titanium-polymer laminated materials. Aviacionnye materialy i tehnologii, 2016, no. S2, pp. 56–62. DOI: 10.18577/2071-9140-2016-0-S2-56-62.