Structure and properties of high-temperature carbon fiber reinforced plastic based on polyimide binder

Zelenina I.V., Valueva M.I., Nacharkina A.V., Kurshev E.V.
UDC
678
DOI
10.18577/2307-6046-2023-0-3-13-28
Article PDF (Russian) (1.64 MB)
How to cite
Zelenina I.V., Valueva M.I., Nacharkina A.V., Kurshev E.V. Structure and properties of high-temperature carbon fiber reinforced plastic based on polyimide binder // Proceedings of VIAM. 2023. No. 3. DOI: 10.18577/2307-6046-2023-0-3-13-28. URL: https://test.viam.ru/en/journal/2023/3/2
Keywords
polymer composite materials, high-temperature carbon fiber reinforced plastics, polyimide binders, technology, structure
Abstract

Presents the results of studies of the influence of technological parameters of shaping on the structure and properties of high-temperature carbon fiber reinforced plastic based on a polyimide binder. It is shown that the formation of a monolithic structure of carbon fiber reinforced plastic with low porosity is achieved by implementing the conditions of the technological process of shaping polymer composite material, which ensure the complete occurrence of thermochemical transformations and the formation of a given structure of a high-temperature composite with maximum preservation of strength indicators at elevated temperatures.

Reference list
  1. Kablov E.N. New generation materials and technologies for their digital processing. Herald of the Russian Academy of Sciences, 2020, vol. 90, no. 2, pp. 225–228.
  2. Kablov E.N., Bakradze M.M., Gromov V.I., Voznesenskaya N.M., Yakusheva N.A. New high strength structural and corrosion-resistant steels for aerospace equipment developed by FSUE «VIAM» (review). Aviacionnye materialy i tehnologii, 2020, no. 1 (58), pp. 3–11. DOI: 10.18577/2071-9140-2020-0-1-3-11.
  3. Kablov E.N. Composites: today and tomorrow. Metally Evrazii, 2015, no. 1, pp. 36–39.
  4. Kablov E.N., Startsev V.O. Measurement and forecasting of materials samples’ temperature du-ring weathering in different climatic zones. Aviacionnye materialy i tehnologii, 2020, no. 4 (61), pp. 47–58. DOI: 10.18577/2071-9140-2020-0-4-47-58.
  5. Mikhailin Yu.A. Heat, thermal and fire resistance of polymeric materials. St. Petersburg: Nauchnye osnovy i tekhnologii, 2011, 416 p.
  6. Valueva M.I., Zelenina I.V., Nacharkina A.V., Ahmadieva K.R. Technological features of obtaining high temperature polyimide carbons. Foreign experience (review). Trudy VIAM, 2022, no. 6 (112), paper no. 08. Available at: http://www.viam-works.ru (accessed September 01, 2022). DOI: 10.18577/2307-6046-2022-0-6-80-95.
  7. Valueva M.I., Zelenina I.V., Zharinov M.A., Khaskov M.A. High-temperature carbon plastics based on thermosetting polyimide binder. Voprosy materialovedeniya, 2020, no. 3 (103), pp. 89–102.
  8. Krysin V.N., Krysin M.V. Technological processes of forming, winding and gluing structures. Moscow: Mashinostroenie, 1989, 240 p.
  9. Timoshkov P.N., Goncharov V.A., Usacheva M.N., Khrulkov A.V. The development of automated laying: from the beginning to our days (review). Part 3. Comparison of ATL and AFP technologies. Hybrid technology of ATL/AFP. Aviation materials and technologies, 2021, no. 4 (65), paper no. 05. Available at: http://www.journal.viam.ru (accessed: September 01, 2022). DOI: 10.18577/2713-0193-2021-0-4-43-50.
  10. Tkachuk A.I., Donetsky K.I., Terekhov I.V., Karavaev R.Yu. The use of thermosetting matrices for the manufacture of polymer composite materials by the non-autoclave molding methods. Aviation materials and technology, 2021, no. 1 (62), paper no. 03. Available at: https://journal.viam.ru (accessed: September 01, 2022). DOI: 10.18577/2713-0193-2021-0-1-22-33.
  11. Veshkin E.A., Satdinov R.A., Savitsky R.S. Approach to the selection of technological mode for the manufacture of PCM. Trudy VIAM, 2021, no. 11 (105), paper no. 10. Available at: http://www.viam-works.ru (accessed: September 01, 2022). DOI: 10.18577/2307-6046-2021-0-11-103-111.
  12. Perov N.S., Gulyaev A.I. About the importance of structure evolution control of polymer composite materials with the microheterogeneous matrix for service life forecasting. Aviacionnye materialy i tehnologii, 2017, no. 1 (46), pp. 75–85. DOI: 10.18577 / 2071-9140-2017-0-1-75-85.
  13. Kolpachkov E.D., Kurnosov A.O., Papina S.N., Petrova A.P. Specificity of the formation of fiberglass based on PMR-polyimides. Trudy VIAM, 2022, no. 6 (112), paper no. 04. Available at: http://www.viam-works.ru (accessed: September 01. 20 DOI: 10.18577/2307-6046-2022-0-7-37-49.22).
  14. Portnoy K.I., Salibekov S.E., Svetlov I.L., Chubarov V.M. Structure and properties of composite materials. Moscow: Mashinostroenie, 1979, 254 p.
  15. Kablov E.N., Minakov V.T., Deev I.S., Nikishin E.F. Study of material microstructure stability for the micrometeoritic protection of «MIR» space comlex. Proc. of the 10th ISMSE & the 8th ICPMSE. Collioure, France, 2006, рр. 1–9.
  16. Deev I.S., Kobets L.P. Structure formation in filled thermosetting polymers. Kolloidnyi zhurnal, 1999, vol. 61, no. 5, pp. 650–660.
  17. Deev I.S., Kurshev E.V., Lonskii S.L. Influence of long-term climatic aging on the microstructure of the surface of epoxy carbon plastics. Voprosy materialovedeniya. 2018, no. 3 (95), pp. 157–169.
  18. Mikhailin Yu.A. Heat-resistant polymers and polymeric materials. St. Petersburg: Professiya, 2006, 624 p.
  19. Kurnosov A.O., Raskutin A.E., Mukhametov R.R., Melnikov D.A. Polymer composite materials based on thermosetting polyimide binders. Voprosy materialovedeniya, 2016, no. 4, pp. 50–62.
  20. Dushin M.I., Hrulkov A.V., Muhametov R.R. A choice of technological parameters of autoclave formation of details from polymeric composite materials. Aviacionnye materialy i tehnologii, 2011, no. 3, pp. 20–26.
  21. Hubert P., Fernlund G., Poursartip A. Autoclave processing for composites // Manufacturing techniques for polymer matrix composites (PMCs). Cambridge: Woodhead Publishing Limited, 2012, 512 р.
  22. Sheppard C.H., Hoggatt J.T., Symonds W.A. Manufacturing processes for fabricating graphite/PMR-15 polyimide structural elements. Seattle; Washington: NASA, Boeing aerospace company, 1979, 300 p.
  23. Sheppard C.H., Hoggatt J.T., Symonds W.A. Quality control developments for graphite/PMR15 polyimide composites materials. Seattle; Washington: NASA, Boeing aerospace company, 1979, 200 p.
  24. Lee C.S. A process simulation model for the manufacture of composite laminates from fiber-reinforced, polyimide matrix prepreg materials: A dissertation submitted to the faculty of the Virginia Polytechnic Institute and State University in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering Mechanics. Blacksburg, 1993, 205 p.
  25. Mills J.S., Herakovich C.T., Davis J.G.Jr. Transverse Microcracking in Celion 6000/PMR-15 Graphite-Polyimide. NASA, Virginia Polytechnic Institute and State University Blacksburg, 1979, 133 p.
  26. Deev I.S., Zastrogina O.B., Shvets N.I., Petukhov V.I., Chursova L.V. Influence of nanomodifiers on the microstructure and mechanical strength of fiberglass based on phenol-formaldehyde binder. Vse materialy. Entsiklopedicheskiy spravochnik, 2012, no. 5, pp. 55–60.
  27. Litvinov V.B., Toksanbaev M.S., Deev I.S. et al. Kinetics of curing of epoxy binders and microstructure of polymer matrices in carbon plastics based on them. Materialovedenie, 2011, no. 7, pp. 49–56.
  28. Gavrilova N.N., Nazarov V.V., Yarovaya O.V. Microscopic methods for determining the particle size of dispersed materials: textbook. Moscow: RKhTU im. DI. Mendeleeva, 2012, 52 p.
  29. Oglezneva S.A., Smetkin A.A., Mitin V.I., Kalinin K.V. Influence of melt atomization parameters on technological characteristics of 12Kh18N10T powder. Vestnik PNIPU: Mashinostroyenie, materialovedenie, 2017, vol. 19, no. 4, pp. 122–138.
  30. Iskhodzhanova I.V., Bondarenko Yu.A., Lapteva M.A. Evaluation of the structure of monocrystalline Ni superalloys derived in different conditions of directional solidification using methods of quantitative analysis of video images. Trudy VIAM, 2015, no. 12, paper no. 06. Available at: http://www.viam-works.ru (accessed: September 01, 2022). DOI: 10.18577/2307-6046-2015-0-12-6-6.