Elastomeric-fabric materials for products of special equipment (review)

Chaykun A.М., Pravada E.S.
UDC
678.8
DOI
10.18577/2307-6046-2023-0-6-25-37
Article PDF (Russian) (618.21 KB)
How to cite
Chaykun A.М., Pravada E.S. Elastomeric-fabric materials for products of special equipment (review) // Proceedings of VIAM. 2023. No. 6. DOI: 10.18577/2307-6046-2023-0-6-25-37. URL: https://test.viam.ru/en/journal/2023/6/3
Keywords
rubbers, elastomere, elastomeric-fabric material
Abstract

Article is devoted to the analysis of the elastomeric and fabric materials which are widely applied at development and operation of products of special equipment, including in the aviation and space industry. The main technical properties of elastomeric and textile materials are given, applied designs of rubber-and-canvas materials are described. The main technological processes of production of elastomeric and fabric materials are described. The approaches applied at forecasting of their operability.

Reference list
  1. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
  2. Kablov E.N. The role of chemistry in the creation of new generation materials for complex technical systems. XX Mendeleev Congress on General and Applied Chemistry: in 5 vols. Ekaterinburg: Ural Branch of the Russian Academy of Sciences, 2016, pp. 25–26.
  3. Kablov E.N. The sixth technological order. Nauka i zhizn, 2010, no. 4, pp. 2–7.
  4. History of aviation materials science. VIAM – 80 years: years and people. Ed. E.N. Kablov. Moscow: VIAM, 2012, рр. 346–348.
  5. Kablov E.N. Aerospace materials science. Vse materialy. Entsiklopedicheskiy spravochnik, 2008, no. 3, pp. 2–14.
  6. Big rubber band guide. Ed. S.V. Reznichenko, Yu.L. Morozov. Moscow: Tekhinform, 2012, part 2: Rubbers and rubber products, 648 p.
  7. Technology of rubber: Formulation and testing: trans. from Engl. Ed. J.S. Dick. St. Petersburg: Nauchnye osnovy i tekhnologii, 2010, 620 p.
  8. Fedyukin D.P., Makhlis F.A. Technical and technological properties of rubbers. Moscow: Chemistry, 1985, 240 p.
  9. Makhlis F.A., Fedyukin D.L. Terminological guide to rubber. Moscow: Khimiya, 1989, 400 p.
  10. Kornev A.E., Bukanov A.M., Sheverdyaev O.N. Technology of elastomeric materials. Moscow: NPPA "Istek", 2009, 502 p.
  11. Agayants I.M. Five centuries of rubber and rubber. Moscow: Modern-A, 2002, 432 p.
  12. Koshelev F.F., Kornev A.E., Bukanov A.M. General rubber technology. 4th ed. Moscow: Khimiya, 1978, 528 p.
  13. Ososhnik I.A., Shutilin Yu.F., Karmanova O.V. Manufacture of rubber technical products. Ed. Yu.F. Shutilina. Voronezh: Voronezh State Technol. Acad., 2007, 972 p.
  14. Grishin B.S. Materials of the rubber industry (information-analytical database). Kazan: KSTU, 2010, vol. 2, 488 p.
  15. Rubber and rubber. Science and technology. Ed. J. Mark, B. Erman, F. Eyrich; trans. from Engl. Ed. A.A. Berlin, Yu.L. Morozov. Dolgoprudny: Intelligence, 2011, 768 p.
  16. Nudelman Z.N. Fluororubbers: basics, processing, application. Moscow: RIAS, 2007, 383 p.
  17. Grinevich D.V., Yakovlev N.O., Slavin A.V. The criteria of the failure of polymer matrix composites (review). Trudy VIAM, 2019, no. 7 (79), paper no. 11. Available at: http://viam-works.ru (accessed: December 01, 2022). DOI: 10.18577/2307-6046-2019-0-7-92-111.
  18. Goldenblat I.I., Kopnov V.A. Strength criterion for anisotropic materials. Mekhanika, 1965, no. 6, pp. 77–83.
  19. Goldenblat I.I., Kopnov V.A. Criterion of strength and plasticity of structural materials. Moscow: Mashinostroenie, 1968, 192 p.
  20. Makovenko S.Ya. On the reciprocity of the components of the strength tensors of some theories of the strength of anisotropic materials. Stroitelnaya mekhanika inzhenernykh konstruktsiy i sooruzheniy, 2005, no. 1, pp. 65–70.
  21. On the soundproofing properties of sound-absorbing materials used in multilayer building envelopes. Nauchnoe obozrenie, 2017, no. 12, pp. 68–72.
  22. Lipatov Yu.S. Physical and chemical bases of filling polymers. Moscow: Khimiya, 1991, 260 p.
  23. Mikhailin Yu.A. Structural polymeric composite materials. 2nd ed. St. Petersburg: Scientific foundations and technologies, 2016, 820 p.
  24. Barbotko S.L. Fire safety of aviation materials for aviation purposes and structural elements based on them: thesis abstract, Dr. Sc. (Tech.). Moscow: VIAM, 2019, 47 p.
  25. Raskutin A.E. Russian polymer composite materials of new generation, their exploitation and implementation in advanced developed constructions. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 349–367. DOI: 10.18577/2071-9140-2017-0-S-349-367.
  26. Barbotko S.L., Volnyj O.S. Veshkin E.A., Goncharov A.E. Estimation of fire resistance of material and structural elements for aviation equipment. Aviatsionnaya promyshlennost, 2018, no. 2, pp. 63–67.
  27. Barbotko S.L., Volny O.S., Kirienko O.A., Shurkova E.N. Evaluation of the fire safety of polymeric materials for aviation purposes: state analysis, test methods, development prospects, methodological features. Ed. E.N. Kablov. Moscow: VIAM, 2018, 424 p.
  28. Handbook of composite materials: in 2 books. Moscow: Mashinostroenie, 1988, book 2, 448 p.
  29. Erasov V.S., Oreshko E.I. Poisson ratio and poisson force. Aviacionnye materialy i tehnologii, 2018, no. 4 (53), pp. 79–86. DOI: 10.18577/2071-9140-2018-0-4-79-86.
  30. Erasov V.S., Oreshko E.I. Reasons for dependence of mechanical characteristics of material fracture resistanceon sample sizes. Aviaсionnye materialy i tehnologii, 2018, no. 3, pp. 56–64. DOI: 10.18577/2071-9140-2018-0-3-56-64.
  31. Oreshko E.I., Erasov V.S., Yastrebov A.S. Prediction of strength and deformation characteristics of materials during tensile and creep tests. Materialovedenie, 2019, no. 1, pp. 3–9.
  32. Popov L.N., Kerimov S.G. Textile materials for technical purposes: directory-catalogue. Yaroslavl, 2006, 492 p.
  33. Kolpachkov E.D., Petrova A.P., Kurnosov A.O., Sokolov I.I. Methods of molding aviation products from PCM (review). Trudy VIAM, 2019, no. 11 (83), paper no. 03. Available at: http://www.viam-works.ru (accessed: December 01, 2022). DOI: 10.18577/2307-6046-2019-0-11-22-36.
  34. Timoshkov P.N., Khrulkov A.V., Usacheva M.N., Purvin K.E. Technological features of the manufacture of thick-walled parts of the PCM (review). Trudy VIAM, 2019, no. 3 (75), paper no. 07. Available at: http://viam-works.ru (accessed: December 01, 2022). DOI: 10.18577/2307-6046-2019-0-3-61-67.
  35. Callister U., Ristic D. Materials science: from technology to application (metals, ceramics, polymers). St. Petersburg: Nauchnye osnovy i tekhnologii, 2011, 896 p.
  36. Vlasov S.V., Kandyrin L.B., Kuleznev V.N. et al. Fundamentals of plastics processing technology. Moscow: Khimiya, 2004, 600 p.
  37. Rudd C.D., Long A.C., Kendall K.N., Mangin C.G.E. Liquid Moulding Technologies. Wood head Publishing and SAE International, 1997, pp. 42–57.
  38. Kryzhanovsky V.K., Kerber M.L., Burlov V.V. Manufacture of products from polymeric materials. St. Petersburg: Profession, 2004, 464 p.
  39. Dmitriev A.O. Problems of development of technology and organization of production of thick-walled products from polymer composites. Razvitie sovremennoy nauki: teoreticheskiye i prikladnye aspekty, 2016, no. 7, pp. 8–10.
  40. Tyukov N.I., Dautov A.I., Zakurdaeva E.A. Mathematical model for controlling the process of autoclave heating in the production of products from composite materials. Vestnik UGATU, 2008, vol. 10, no. 2 (27), pp. 159–163.
  41. Shershak P.V. National standardization specifics of polymer composites materials tests methods. Trudy VIAM, 2019, no. 2 (74), paper no. 08. Available at: http://www.viam-works.ru (accessed: December 01, 2022). DOI: 10.18577/2307-6046-2019-0-2-77-88.
  42. Klimenko O.N., Valueva M.I., Rybnikova A.N. Polymers and polymer composites in sport (review). Trudy VIAM, 2020, no. 10 (92), paper no. 09. Available at: http://www.viam-works.ru (accessed: December 01, 2022). DOI: 10.18577/2307-6046-2020-0-10-81-89.