Comprehensive assessment of the impact of operational and climatic testing on the strength properties of polymer composite materials with shaping at temperatures up to 40 °С

Part 1. Fiberglass of the VPS-58 brand
Evdokimov A.A., Veshkin E.A, Kablov E.N., Laptev A.B., Barannikov A.A.
UDC
678.067.5
DOI
10.18577/2307-6046-2025-0-11-23-37
Article PDF (Russian) (808.11 KB)
How to cite
Evdokimov A.A., Veshkin E.A, Kablov E.N., Laptev A.B., Barannikov A.A. Comprehensive assessment of the impact of operational and climatic testing on the strength properties of polymer composite materials with shaping at temperatures up to 40 °С. Part 1. Fiberglass of the VPS-58 brand // Proceedings of VIAM. 2025. No. 11. DOI: 10.18577/2307-6046-2025-0-11-23-37. URL: https://test.viam.ru/en/journal/2025/11/3
Keywords
fiberglass, physical and mechanical characteristics, operational factors, retention of properties
Abstract

The article provides the results of a comprehensive assessment of the retention of the strength properties of VPS-58 fiberglass under tension, compression and bending in the temperature range of –60 to +80 °C in the initial state and after exposure to operating factors. These factors included exposure in a tropical climate chamber and hygrothermal aging under different conditions for 1 and 3 months, as well as thermal aging for 500, 1000, 1500 and 2000 hours. The influence of mycological environment and automotive fuels and lubricants on the bending strength limit of fiberglass and mass change was studied.

Reference list
  1. Kablov E.N., Chursova L.V., Babin A.N., Mukhametov R.R., Panina N.N. Developments of FSUE VIAM in the field of melt binders for polymer composite materials. Polimernye materialy i tekhnologii, 2016, vol. 2, no. 2, pp. 37–42.
  2. Kablov E.N., Laptev A.B., Prokopenko A.N., Gulyaev A.I. Relaxation of polymeric composite materials under the prolonged action of static load and climate (review). Part 1. Binders. Aviation materials and technologies, 2021, no. 4 (65), paper no. 08. Available at: http://www.journal.viam.ru (accessed: October 05, 2024). DOI: 10.18577/2713-0193-2021-0-4-70-80.
  3. Putilina P.M., Kutsevich K.E., Isaev A.Yu. Carbon fiber-reinforced and glass fiber-reinforced polymer composites for the manufacture of components for unmanned aerial vehicles and their developing prospects. Trudy VIAM, 2023, no. 8 (126), paper no. 08. Available at: http://www.viam-works.ru (accessed: December 11, 2024). DOI: 10.18577/2307-6046-2023-0-8-85-99.
  4. Kablov E.N. New Generation Materials and Digital Technologies for Their Processing. Vestnik Rossiyskoy akademii nauk, 2020, vol. 90, no. 4, pp. 331–334.
  5. Perepelkin K.E. Reinforcing Fibers and Fiber Polymer Composites. Moscow: Scientific Foundations and Technologies, 2009, 386 p.
  6. Mikhaylin Yu.A. Structural Polymer Composite Materials. Moscow: Scientific Foundations and Technologies, 2010, 822 p.
  7. Evdokimov A.A., Petrova A.P., Raskutin A.E. et al. Polymer Composite Materials for Application in the Construction Industry. Reports VIII All-Rus. Youth Scientific Forum «OpenScience 2021». Gatchina: NRC «Kurchatov Institute» – PNPI, 2021, p. 124.
  8. Vlasenko F.S., Raskutin A.E. Applying FRP in building structures. Trudy VIAM, 2013, no. 8, paper no. 03. Available at: http://viam-works.ru (accessed: December 11, 2024).
  9. Evdokimov A.A., Imametdinov E.Sh., Malakhovskiy S.S. Strengthening concrete building structure via reinforcement external system from carbon plastic. Trudy VIAM, 2020, no. 10 (92), paper no. 08. Available at: http://www.viam-works.ru (accessed: December 11, 2024). DOI: 10.18577/2307-6046-2020-0-10-73-80.
  10. Evdokimov A.A., Venediktova M.A., Vakhrusheva Ya.A., et al. Experience of using polymeric materials in the construction of prefabricated arched bridge structures. Proc. of the Int. Sc. and Pract. Conf. «Materials Science, Form-Generating Technologies and Equipment». Simferopol: KFU, 2024, pp. 127–136.
  11. Tkachuk A.I., Zagora A.G., Donetsky K.I., Evdokimov A.A. Polymeric matrixes for composite materials used in the construction of quickly built bridge structures. Trudy VIAM, 2020, no. 12 (94), paper no. 07. Available at: http://www.viam-works.ru (accessed: December 11, 2024). DOI: 10.18577/2307-6046-2020-0-12-67-74.
  12. Kogan D.I., Chursova L.V., Petrova A.P. Analysis of production technologies for continuously reinforced polymer composite materials using non-autoclave manufacturing methods (review). Kompozitsionnye materialy, 2011, no. 11, pp. 2–6.
  13. Sedov L.N., Mikhailova Z.V. Unsaturated polyesters. Moscow: Khimiya, 1977, 232 p.
  14. Bolshakov V.A., Antyufeeva N.V. Evaluation of the curing process model of the adhesive binder in prepreg. Aviation materials and technologies, 2023, no. 4 (73), paper no. 07. Available at: http://www.journal.viam.ru (accessed: October 20, 2024). DOI: 10.18577/2713-0193-2023-0-4-66-77.
  15. Bobylev V.A. Special epoxy resins for adhesives and sealants. Klei. Germetiki. Tekhnologii, 2005, no. 5, pp. 8–11.
  16. Tkachuk A.I., Donetsky K.I., Terekhov I.V., Karavaev R.Yu. The use of thermosetting matrices for the manufacture of polymer composite materials by the non-autoclave molding methods. Aviation materials and technology, 2021, no. 1 (62), paper no. 03. Available at: https://www.journal.viam.ru (accessed: December 21, 2024). DOI: 10.18577/2713-0193-2021-0-1-22-33.
  17. Evdokimov A.A., Raskutin A.E., Mishkin S.I. et al. Arched bridges using carbon fiber arch elements. Konstruktsii iz kompozitsionnykh materialov, 2019, no. 2 (154), pp. 22–29.
  18. Mikhaldykin E.S. Use of tube-concrete structures with a shell made of polymer composite materials in the construction of small bridges: thesis, Cand. Sc. (Tech.). Moscow, 2021, 111 p.
  19. Kablov E.N. The role of fundamental research in the creation of new generation materials. Reports XXI Mendeleev Congress on General and Applied Chemistry: in 6 vols. St. Petersburg, 2019, vol. 4, p. 24.
  20. Startsev V.O. The degradation of polymer composite materials in seawater (review). Aviation materials and technologies, 2023, no. 1 (70), paper no. 12. URL: http://www.journal.viam.ru (accessed: December 21, 2024). DOI: 10.18577/2713-0193-2023-0-1-148-170.
  21. Sherriff M., Knibbs R.W., Langley P.G. Mechanism for the action of tackifying resins in pressure-sensitive adhesives. Journal of Applied Polymer Science, 1973, vol. 17, pp. 3423–3438.
  22. Hata T., Tsukatani T., Mizumachi H. Holding power (tb) and sliding friction coefficient of pressure sensitive adhesives. Journal of the Adhesion Society Japan, 1994, vol. 30, pp. 307–312.
  23. Allen K.W. A review of contemporary views of theories of adhesion. The Journal of Adhesion, 1987, vol. 21, pp. 261–277.
  24. Leong Y.C., Lee L.M.S., Gan S.N. The viscoelastic properties of natural rubber pressure-sensitive adhesive using acrylic resin as a tackifier. Journal of Applied Polymer Science, 2003, vol. 88, pp. 2118–2123.
  25. Fujita M., Takemura A., Ono H. et al. Effects of miscibility and viscoelasticity on shear creep resistance of natural-rubber-based pressure-sensitive adhesives. Journal of Applied Polymer Science, 2000, vol. 75, pp. 1535–1545.
  26. Fujita M., Kajiyama M., Takemura A. et al. Miscibility between natural rubber and tackifiers. I. Phase diagrams of the blends of natural rubber with rosin and terpene resins. Journal of Applied Polymer Science, 1987, vol. 64, pp. 2191–2197.
  27. Fujita M., Kajiyama M., Takemura A. et al. Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins. Journal of Applied Polymer Science, 1998, vol. 67, pp. 221–229.
  28. Fujita M., Kajiyama M., Takemura A. et al. Effects of miscibility on peel strength of natural-rubber-based pressure-sensitive adhesives. Journal of Applied Polymer Science, 1998, vol. 70, pp. 777–784.
  29. Whitehouse R.S., Counsell P.J.C. Composition of rubber/resin adhesive films: 1. Surface composition as determined by ATR-IR spectroscopy. Polymer, 1976, vol. 17, pp. 699–704.
  30. Sherriff M. Peel adhesion and viscoelasticity of rubber-resin blends. Journal of Applied Polymer Science, 1980, vol. 18, pp. 2597–2608.
  31. Afanasyev D.V., Oshchepkov M.Yu. Non-autoclave technologies. Kompozitniy mir, 2010, no. 5, pp. 28–37.
  32. Kirillov V.N., Startsev O.V., Efimov V.A. Climatic firmness and damageability of polymeric composite materials, problems and solutions. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 412–423.
  33. Kablov E.N., Startsev O.V. The basic and applied research in the field of corrosion and ageing of materials in natural environments (review). Aviacionnye materialy i tehnologii, 2015, no. 4 (37), pp. 38–52. DOI: 10.18577/2071-9140-2015-0-4-38-52.
  34. Startsev V.O. Climatic resistance of polymer composite materials and protective coatings in a moderately warm climate: thesis, Dr of Sc. (Tech.). Moscow, 2018, 297 p.
  35. Startsev V.O., Valevin E.O., Gulyaev A.I. The influence of polymer composite materials’ surface weathering on its mechanical properties. Trudy VIAM, 2020, no. 8 (90), paper no. 07. Available at: http://www.viam-works.ru (accessed: December 11, 2024). DOI: 10.18577/2307-6046-2020-0-8-64-76.
  36. Volnov O.I., Dudukin D.O. Fiberglass. History of development, production technology, shaping of parts and modern application. Trudy NGTU im. R.E. Alekseeva, 2014, no. 5 (107), pp. 400–404.
  37. Petrova A.P., Isaev A.Yu., Lukina N.F., Smirnov O.I. Influence of reinforcing fiber filler on the properties of epoxy-polysulfide adhesive VK-36. Klei. Germetiki. Tekhnologii, 2022, no. 8, pp. 2–7.
  38. Zastrogina O.B., Serkova E.А., Sarychev I.A., Vavilova M.I. Influence of Russian and Chinese vinyflex on the properties of the VFT binder and fiberglass based on it. Aviacionnye materialy i tehnologii, 2020, no. 3 (60), pp. 3–9. DOI: 10.18577/2071-9140-2020-0-3-3-9.
  39. Petrova A.P., Malysheva G.V. Adhesives, adhesive binders and adhesive prepregs: textbook. Ed. E.N. Kablov. Moscow: VIAM, 2017, 472 p.