Production of standard polymer composite samples with the set porosity by vacuum infusion

Gusev Y.A., Grigoriev M.M., Timoshina L.N.
UDC
678.8
DOI
10.18577/2307-6046-2014-0-11-6-6
Article PDF (Russian) (633.15 KB)
How to cite
Gusev Y.A., Grigoriev M.M., Timoshina L.N. Production of standard polymer composite samples with the set porosity by vacuum infusion // Proceedings of VIAM. 2014. No. 11. DOI: 10.18577/2307-6046-2014-0-11-6-6. URL: https://test.viam.ru/en/journal/2014/11/6
Abstract

In this study the manufacturing technologies of standard CFRP samples with the set porosity by vacuum infusion using a semipermeable membrane, on a basis of epoxy resin depending on impregnation parameters have been considered. Measurement of porosity was carried out visually on sections. Samples of plates were investigated by echo-pulse ultrasonic control method , using phased arrays for detection of dependence between a ground signal and porosity in standard samples.

Reference list
  1. Kablov E.N. Strategicheskie napravlenija razvitija materialov i tehnologij ih pererabotki na period do 2030 goda [Strategic directions of development of materials and technologies to process them for the period up to 2030] //Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
  2. Kablov E.N. Himija v aviacionnom materialovedenii [Chemicals in aviation materials] //Rossijskij himicheskij zhur-nal. 2010. T. LIV. №1. S. 3–4.
  3. Kogan D.I., Chursova L.V., Petrova A.P. Polimernye kompozicionnye materialy, po-luchennye putem propitki plenochnym svjazujushhim [Polymer composite material obtained by impregnating a film binder] //Kompozicionnye materialy. 2011. №11. S. 2–6.
  4. Veshkin E.A., Postnov V.I., Abramov P.A. Puti povyshenija kachestva detalej iz PKM pri vakuumnom formovanii [Ways to improve the quality of parts of the PCM with vacuum forming] //Izvestija Samarskogo nauchnogo centra Rossijskoj akademii nauk. 2012. T. 14. №4 (3). S. 831–838.
  5. Minakov V.T., Postnov V.I., Hpul'kov A.V., Postnov A.V., Pletin' I.I. Osobennosti skleivanija detalej iz PKM s ispol'zovaniem polimepnoj osnastki [Features gluing parts of PCM using polymeric snap] //Klei. Germetiki. Tehnologii. 2008. №5. S. 24–29.
  6. Muhametov P.P., Ahmadieva K.R., Chursova L.B., Kogan D.I. Novye polimernye svjazujushhie dlja perspektivnyh metodov izgotovlenija konstrukcionnyh voloknistyh PKM [New polymeric binders for the promising methods for the manufacture of structural fibrous PCM] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38–42.
  7. Mihajlin Ju.A. Konstrukcionnye polimernye kompozicionnye materialy [Structural polymer composite materials]. SPb.: NOT. 2008. 820 s.
  8. Kerber M.L., Vinogradov V.M. Polimernye kompozicionnye materialy: struktura, svojstva, tehnologija [Polymer composite materials: structure, properties, technology]. SPb.: Professija. 2009. 560 s.
  9. Alent'ev A.Ju., Jablokova M.Ju. Svjazujushhie dlja polimernyh kompozicionnyh materialov [Binders for polymeric composite materials]: Ucheb. posobie. M.: MGU im. M.V. Lomono-sova. 2010. 69 s.
  10. Muhametov R.R., Ahmadieva K.R., Kim M.A., Babin A.N. Rasplavnye svjazujushhie dlja perspektivnyh metodov izgotovlenija PKM novogo pokolenija [Melt binders for advanced methods of manufacturing a new generation of PCM] //Aviacionnye materialy i tehnologii. 2012. №S. S. 260–265.
  11. Babin A.N. Svjazujushhie dlja polimernyh kompozicionnyh materialov novogo pokolenija [Binders for polymer composite materials of new generation] //Trudy VIAM. 2013. №4 (viam-works.ru).
  12. Borshhev A.V., Hrul'kov A.V., Halturina D.S. Izgotovlenie nizkoporistogo polimernogo kompozicionnogo materiala dlja primenenii v slabo- i srednenagruzhennyh konstrukcijah [Production of low porosity of the polymer composite material for use in low and medium duty designs] //Trudy VIAM. 2014. №7. St. 03 (viam-works.ru).
  13. Himicheskaja promyshlennost'. Obzornaja informacija. Ser. «Jepoksidnye smoly i ma-terialy na ih osnove». «Otverditeli dlja jepoksidnyh smol» [Chemical Industry. Overview. Ser. «Epoxy resins and materials based thereon». «Hardeners for epoxy resins»]. M.: NIITJeHIM. 1983. 39 s.
  14. Jepoksidnaja kompozicija [Epoxy system]: pat. 2447104 Ros. Federacija; opubl. 05.10.2010.
  15. Starcev O.V., Kablov E.N., Mahon'kov A.Ju. Zakonomernosti perehoda jepoksidnyh svjazujushhih kompozicionnyh materialov po dannym dinamicheskogo mehanicheskogo analiza [Laws of the transition epoxy binder composite materials according to the dynamic mechanical analysis] //Vestnik MGTU im. N.Je. Baumana. Ser. «Mashinostroenie». 2011. №SP2. S. 104–113.
  16. Hrul'kov A.V., Dushin M.I., Popov Ju.O., Kogan D.I. Issledovanija i razrabotka avtoklavnyh i bezavtoklavnyh tehnologij formovanija PKM [Research and development of autoclave and non-autoclave molding technology PCM] //Aviacionnye materialy i tehnologii. 2012. №S. S. 292–301.
  17. Dushin M.I., Hrul'kov A.V., Muhametov P.P. Vybor tehnologicheskih parametrov avtoklavnogo formovanija detalej iz polimernyh kompozicionnyh materialov [Selection of process parameters autoclave molding parts made of polymeric composite materials] //Aviacionnye materialy i tehnologii. 2011. №3. S. 20–26.
  18. Postnov V.I., Burhan O.L., Rahmatullin A.Je., Kachura S.M. Nerazrushajushhie metody kontrolja soderzhanija svjazujushhih v prepregah i PKM (obzor) [Non-destructive testing binder content of the prepregs and PCM (review)] //Trudy VIAM. 2013. №12. St. 06 (viam-works.ru).
  19. Dalin M.A., Generalov A.S., Bojchuk A.S., Lozhkova D.S. Osnovnye tendencii razvitija akusticheskih metodov nerazrushajushhego kontrolja [The main trends in the development of acoustic methods of non-destructive testing] //Aviacionnye materialy i teh-nologii. 2013. №1. S. 64–69.
  20. Bojchuk A.S., Stepanov A.V., Kosarina E.I., Generalov A.S. Primenenie tehnologii ul'trazvukovyh fazirovannyh reshetok v nerazrushajushhem kontrole detalej i konstrukcij aviacionnoj tehniki, izgotovljaemyh iz PKM [Application of ultrasonic phased array technology in nondestructive testing of parts and structures of aircraft, manufactured from PCM] //Aviacionnye materialy i tehnologii. 2013. №2. S. 41–46.
  21. GOST 15139–69. Plastmassy. Metody opredelenija plotnosti (ob`emnoj massy) [Plastics. Methods for determining the density (bulk density)].